STEP BY STEP INSTRUCTIONS ON HOW TO CHANGE YOUR DRIVE SHAFT

If you have any further question on how to install your Drive Shaft, please call us at 1 (305) 503-9921 or e-mail us info@europeanpartssolution.com and one of our drive shaft specialists will assist you.

TOOLS REQUIRED TO REPLACE YOUR CAYENNE DRIVE SHAFT

• 12mm triple square socket
• 18mm socket
• Ratchet
• Hammer
• 13mm socket
• Drive Socket
• 1/2 Inch Extension
• 6 Inch Extension

Step 1: With your 12mm remove the 6 bolts on the back of the drive shaft.

Step 2: Remove the 3 18mm nuts and bolts from the front of the drive shaft.

Step 3: Remove the 3 18mm bolts on the Flex Disc.

Step 4: Remove the 13mm bolts on the plate that cover the center support bearing.

Step 5: Support the exhaust and loosen all exhaust clamps.

Step 6: Remove the center, passenger, and lastly the drive's side exhaust hanger bolts.

Step 7: Pull drive shaft forward to separate the drive shaft from the differential.

Step 8: Remove the drive shaft.